Panasonic IP Cameras

Panasonic Security Cameras

IP Cameras Available for Business or Home Use

Choose between Indoor or Outdoor Cameras

Camera has its own IP Address off of LAN

Comes with its own recording software

You can log on to a website link to access the following features:

Website can be password protected for added security

You can access your camera network from anywhere that you have internet access

Panasonic provides a website to demo the cameras and receive training on setting up your network

Panasonic Netcam Devices interface with iPhone & Blackberry Apps so you can control your camera from your mobile phone

Access multiple cameras through a Web Portal and view up to 16 cameras

Set cameras to record motion only

Panasonic Netcam has the ability to sense human presence rather than a bird or other animal passing by to avoid recording unnecessary data

BB Line of cameras can record over your LAN to a PC, Server, or Media Storage Device

You may also record the BB line of cameras to an SD Chip in the camera. This is most common device for remote cameras.

Each camera takes a very small amount of bandwidth approximately 56 Kbps per camera or per site


BB-HCA1A-B	BB-HCH280R	BB-HCM371A	BL-C111A	BB-HCM580A

You may network cameras at multiple sites. Does not require a static IP address or VPN connection. You may use DHCP or set up a VLAN.
Remote locations can be networked to main site where camera recordings are stored and viewed. It can be set so that remote sites cannot be tampered with by workers or users onsite. Recording would only be controlled through the main location
Interfaces with NT400 Phone Camera Screen to View Still Images, Recorded Data, or Live Streaming Data from IP Cameras
From your NT400 Phone you have the ability to view Who is at the Door, Answer a Call from the Door Phone, and Open the Door from the Door Opener
Special Panasonic Router coming soon for home installation. It automatically configures the cameras for you. Requires a patch cord. Router also supports other devices such as computers or laptops. You may connect up to 8 wired devices and up to 16 wireless devices
Connect Cameras to new Panasonic 24 Port POE Switch which will automatically sense and configure Panasonic Devices. Supports IP Cameras, IP Phones such as the NT400, and DECT Wireless Phones through 8-Channel DECT Cell Station on Same Device
Important for home set ups so that all devices will interface with each other (IP Phones, Wireless DECT Phones, Cameras and NT400 Phone) as well as your Control 4 Home Automation system
Automatic QoS setting at the switch level rather than PBX level for enhanced Clarity